SPICE Desire SRD-01 Drift Chassis

Spec:
Wheel Base (255mm - 259mm adjustable): Standard 257mm
Tread (186mm - 190mm adjustable): Standard 186mm
Gear Ratio: 2.0 (36T/18T)
Drive: 2 belt / 4wd
Damper: F&R CVA Oil Damper
Full Ball Bearings
Suspension system: Double Wishbone
Steering Tie Rod: 3 steps
Caster: Adjustable: 4, 7, 10, 14 deg
Camber: 0 - -10 deg.

yokomo d-max

Yokomo D-Max special has been even modified further!!

Including newly designed parts and ready for drift experts!

By using BD5 suspensions and newly designed long springs, it enhances stability and traction. Front Suspension Mount is designed 1.5 deg toe-out, increased steering response. Aluminium bell crank, Team Suzuki Aluminium Steering block, suspension arms are using reinforced carbon resin materials ensure increased response even under extreme drifting condition. Newly designed main chassis ensures roll balance and high end drifting can be achieved.

For drive traing, using newly designed aluminium center drive shaft, carbon reinfoced transmission case, aluminium drive cup will ensure better throttle response as well as rigidity. Motor mount also has been newly designed and easy and wide setting of motor position is now possible.

Further more, using Team Suzuku rear caliper set, it looks "bling bling"!

One of the best shaft driven drift chassis on the market!!

Features:
* BD5 Damper Suspension and Long Spring
* Front Sus Mount Toe Out 1.5 deg, rear sus mount 3deg + rear hub carrier 1 deg > New alignment setting.
* Newly designed special motor mount
* Newly designed aluminium center bulkhead cap
* Carbon reinforced transmission case, sus arms, front hub carrier
* Team Suzuki Rear Caliper Set and Aluminium Steering Block!

D-Max Special Chassis features PLUS following features
* High traction main chassis
* Titanium Screw Set
* Titanium Sus pin tapping screws
* H.D Lower Sus Arm (F&R light weight graphite)
* Graphite reinforced front steering hub carrier (caster 4deg)
* Graphite reinforced transmission case
* Aluminium front sus mount (rear toe out 1.5deg)
* Team Suzuki Real Caliper Set Front (Gold)
* Team Suzuki Real Caliper Set Rear (Gold)
* Team Suzuki Real Caliper Aluminium Steering Block
* Tea Suzuki Real Caliper Aluminium Rear Hub Carrier (Toe in 1 deg)
* D-Max aluminium main gear cover ver.2
* D-Max special motor mount set ver.2
* Front aluminium center shaft set
* Rear aluminium center shaft set
* Aluminium center drive cup
* Drive Cup rubber boots
* BD-5 pro shock set (SSS Size)
* Ray Speed aluminium spring cup
* Long spring

kit ni telah lama di pasarkn,

yokomo dp

DRIFT PACKAGE PLUS Type-C

This kit contains the most popular option parts for the standard Yokomo drift chassis:

• High efficiency shaft drive full-time 4WD system (dustproof drivetrain)
• Fully adjustable double wishbone suspension
• Adjustable aluminium dampers
• Blue aluminium center shaft
• Universal drive shafts
• Aluminium diff joint ring
• Aluminium motor mount

Changed parts compared to former drift package:

• Suspension has been modified for extreme camber settings
• Up to 7° caster possible
• Variable tread
• Less spare parts because symmetric suspension design
• Rear toe-in is freely adjustable by turnbuckles
• 4 universal drive shafts
• Lipo battery compatible
• One touch damper pivot

fun race, jemputan maybank sandakan

thanks kepada yg terlibat dlm fun race ni, terutamanya mmbr2 dr LD, yg sanggup turun untuk mjayakn aktiviti
ni, xlupa juga kepada En.Azlan kerana sudi menjemput rakan2 rc drift, to bro rozali.. tq kerana banyk membantu... akhir kata majula drift utk suma, hehehe

yokomo drb

Yokomo DRB has been popular amongst expert Drifters now available with SSG (Silver Surface Graphite version!)

Front and Rear Damper Stay as well as Upper deck using SSG materails. Further more, it include improved strong type center bridge connected to center bulkhead! This will enhance stability and improved response.

Must have item for Yokomo and Drift Mania!!

Features:
* 2 drive belts
* Front Midship Motor Layout
* Full counter drift can be achieved
* Steering angle > 45 deg!
* Super low gravity setting
* SSG Main Chassis and Upper Deck
* SSG Front & Rear Damper Stay
* Hyper Center Bridge and Hyper Center Bulkhead
* Titanium Turnbuckle and Tie Rod
* Highly precision aluminium F&R Bulkhead
* Highly precision aluminium hyper motor mount
* Aluminium Oil Dampers!

tamiya vdf

Specs and Features

1/10 R/C assembly kit.-All the anodized aluminum parts now come reproduced with

Chassis Length: 366mm, Width: 188mm, Wheelbase: 257mm, Tread (F/R): 168mm.

Chassis features 2mm thick carbon Vertical Double Frame and a 2mm thick Carbon Lower Deck.

The parallel geometry steering system provides this machine with excellent steering control for counter steering.

Flouring coated, threaded bodied, TRF dampers included.

Gear Ratio range= 4.39-8.53:1

Front ball differential and rear locked differential.

Foam bumper.

Short reversible suspension as used on the TB03, TA05 V2, TRF416 and TRF417 chassis.

Universal joint axles-Belt drive 4WD, full independent suspension.

36T differential pulleys and 18T center pulley.

Comes equipped with full ball bearings

alex racing d11

Using one of the best carbon materials available in the world for extreme drifting performance (made in Japan)!

* Caster Angle: 7 degrees & High Angle
* High Camber capable C Hub
* Toe-In Rear 1 degrees Hub Carrier
* Multi Low Friction Damper (easy adjustable)
* Include 2 Ratio - Set Up
Normal Drift: Rear 36T, Center 16T, 471 Belt)
Ketsukaki / Counter Drift: Rear 32T, Center 18T, 468 Belt) * Front One Way
* Rigid Axle Unit
* Center One Way
* Newly designed Axle
* Newly designed Universal
* Newly designed Chassis

D-LIKE DL070 Drift Conversion Kit Re-R Version Silver( For Yokomo )

DL070 Drift Conversion Kit Re-R Version Silver( For Yokomo )
DL070 Drift Conversion Kit Re-R Version Silver( For Yokomo )


Style realism to express it in a heavy feeling of speed control to induce movement of the body weight on the accelerator!
Stiffness and balanced Rigidity of the chassis parts represent a significant load shift! D-Like sticking to rigid design style
Traction control and represent the weighted moving back and forth in front of sticking accelerator integrated bulk
The main part of the drive system can be used for Yokomo products are readily available parts. Aluminum parts are silver specifications.

Package comes with following:

Front Damper Stay x 1
Rear Damper Stay x 1
Upper Deck x 1
Main Chassis x 1
Front Bulkhead L x 1
Front Bulkhead R x 1
Rear Bulkhead L x 1
Rear Bulkhead R x 1
Belt Tensioner Post x 1
Main Gear Adaptor x 1
Drive Belt Rear x 1
Drive Belt Front x 1
Diff Pulley 40T x 2
Center Shaft x 1
Center Pulley x 2
Pulley Coller x 2
4.0 x 0.3 Sims x 3
Uni Crank Post x 2
Uni Crank Post coller x 1
Uni Crank Plastic Parts x 1
Saver Mount x 1
Saver Nuts x 1
Saver Spring x 1
840 Metal x 4
38mm Turnbuckle x 1
58mm Turnbuckle x 1
4.3 ball end x 2
4.3ball 4.5*6.5 x 1
840 Flange Bearing x 2
Belt Tensioner Flange pipe x 1
Screw

review alex racing car

pengeluar : japan

RC Drift Tips and Excercises

ni adalah salah 1 contoh kepada mmbr2 or org2 yg bru sja menceburi bidang rc drift
harap korang truskn usaha, hingga jd pro dlm rc drift ni...
majulah drift utk suma dan sandakan town, kekeke

p/s utk d-box(or yg sama jns dengannya) yg d akhir video ni, adalah tidak d syorkn pakai untuk newbie rc drift,

video lma sandakan rc drift

my Fijon kit

fijon chasis.. mod to get more flexi
and bumper brace mod to look more cute, hehe


setup
tyre : hpi t-drift
front pulley 37t(spool) n 16t(centerpulley)
rear pulley : 28t(spool) n 23t(center pulley)
cs : 90%
front drive : one-way


front
camber : -6dgree
toe : 0
damper oil : hpi 50
spring : hpi titanium soft

rear
camber : -3dgree
teo : std
damper oil : hpi 30
spring : hpi titanium soft